ALDEBARAN series 1000 with emergency lighting function


 
Emergency lighting function

In case of a breakdown to the supply voltage, there will be automatically be at least 1h of emergency light with 20% capacity of a 36W tube = 40W bulb.
Switching-time less than 0,3 sec.

The emergency light of the ALDEBARAN series is another expedient addition to the product range of Setolite. This lamp can predominantly be utilised in all areas where energy is produced by electric generators or rather emergency power supplies. If the energy supply is disconnected once by a power outage, the switching time from mains operation to battery operation will be less than 0,3 seconds. The emergency mode can of course be disconnected by an integrated push-button; however the mode can only be activated anew by another mains power failure. The installation of high-quality special ballasts will avoid that the self-heating won’t go beyond the value of 40°C, so that there won’t araise any source of danger in wide-span tents or in construction sites for tunnel and street construction.

Please note that this emergency light does not resemble a pictogram lamp.

Type

2 x 36 W

With Emergency light function

Illuminant TCL/840

2 x 36W

Ballast

Electric ballast

Battery

NiCd 6V/2,5Ah

Control system turn-on time

< than 0,3 sec.

Charging time

24h

Light efficiency

in emergency mode

For a tube approx. 20%

Operating time

In emergency mode

Min. 1h

Luminous flux

5.800 lm

Rated current

0,38A

Corresponds to a bulb of approx.                                           

500 W

Burning lifetime

20.000h

Dimensions (LxWxH) approx.

485 x 190 x 145mm

Weight approx.

4,6 kg

Supply voltage

230V/50Hz

Item number

1410230362